woodworking plywood tips
This clever plywood caddy will work on 1/2″ and 3/4″ sheet goods. makes sense that you would want it capable of pinching tight on 1/2″ goods also. since you can adjust the tightening knobs, it will hold snug to either thickness with 1/2″ spacer, but “expand or flare out” enough to fit the 3/4″ as well, without being too tight or. Mark the vise-mounting holes on the plywood and drill 3/4-in. guide holes through both pieces. recess the nut by drilling through the bottom sheet with a 1-in. spade bit using the 3/4-in. hole as a guide. fasten the vise to the plywood with bolts sized to match the vise-mounting holes. if the bolt shafts are too long, cut them off with a hacksaw.. Hey friends, today i show you 5 wood working tricks that will be very useful. it will be reduces many of our problems while working on wood. if you like this video then click on like and subscribe.
woodworking plywood tips
0 comments:
Post a Comment